Hydron have produced a range of stone sealers which can be used on all types of stone from brickwork, concrete, sandstone, reconstituted stone, limestone, marble granite and slate to name but a few. The Nu-Cryl Range of environmentally friendly stones sealers will protect against water, oil, graffiti, pollution, staining, organic growth and chewing gum adhesion.
The unique properties of Nu-Cryl will alter the chemical structure of a porous building or floor. This will in turn provide oil and water proofing properties. The appearance of the substrate will not change and will remain moisture vapour permeable.
The majority of these stone sealers are applied in 1 easy application saving on labour costs.
Health and Safety
Nu-Cryl WRS is a unique oil and water resistant treatment for vertical surfaces. It has excellent water proofing qualities which reduces penetration of oil and water, with frost damage and organic growth massively reduced. There is also the added benefit of stain and dirt resistance which conforms to BS 6477:1992.
Nu-Cryl WRS is highly resistant to weathering and UV exposure and will not affect the original colour of the substrate and will not leave a glossy appearance. This clear and invisible impregnation is also moisture vapour permeable and allows the substrate to breath. Due to its excellent water resistant properties the Nu-Cryl WRS is unaffected by freeze/thaw cycles.
Applied in one easy application by brush or spray this will reduce labour costs. This stone sealer is very versatile and can be applied to a variety of substrates such as brickwork, concrete, natural stone, reconstructed stone and blockwork, granite, marble and terrazzo, and may also be used on wood.
Health and Safety
Nu-Cryl WRS Extra is a unique oil and water proofing treatment for floors.
Ideally for use on dense floors such as pedestrian areas, car parks and paving which is subject to heavy wear and staining. Paving treated with Nu-Cryl WRS Extra will resist oil penetration and create a non-stick surface that allows easy removal of chewing gum.
The application of the product is very easy using either a brush or sprayer. Only one application is required which will reduce the labour costs.
Nu-Cryl WRS Colour Enhancer is a unique water based modified polysiloxane which provides oil and water resistant properties and lifts the true colour of the substrate.
Due to its excellent water proofing qualities, Nu-Cryl WRS Colour Enhancer reduces the penetration of oil and water. Frost damage and organic growth and reduced considerable.
Conforms to BS 6477:1992 for stain and dirt resistance. When applied in one easy application the natural colour of the substrate will be enhanced giving a refreshed and new look to the stone. With the added benefit of a leaving a non-stick surface the removal of chewing gum is greatly improved.
Highly resistant to weathering and UV exposure as well as being moisture vapour permeable stone coated with Nu-Cryl WRS Colour Enhancer will truly benefit from long term protection and be unaffected by freeze/thaw cycles.
Nu-Cryl WRS Sand & Block Sealer is a unique, water based resin, liquid surface and sand joint sealer. Nu-Cryl WRS Sand & Block Sealer has special properties, which allow it to bond sand in the joint whist still maintaining a degree of flexibility. When applied to the surface of concrete / clay pavement materials. Nu-Cryl WRS Sand & Block Sealer also functions as a surface sealer that provides and easy clean surface with protection against water and forms of staining agents such as oil etc.
Health and Safety
Nu-Cryl A.G and Nu-Cryl A.G Extra are a unique, clear, hydrophobic impregnation coating system providing the ultimate Anti Graffit Coating. Nu-Cryl A.G. will not noticeably change the appearance of the substrate. Due to its excellent stain and water resistant qualities, dirt, pollution, and even graffiti can be removed from the treated surface.
The system gives long life graffiti and environmental protection. It has outstanding resistance to weathering and ultra-violet degradation, and no reapplication is required after graffiti removal. It is tested and Satisfies Class’0’ requirements of current Building Regulation. Nu-Cryl AG has also been Tested to BS 6853 Determination of weighted summation of toxic fumes and Methods for measuring Smoke Density.
Nu-Cryl A.G. Render Coat is a unique, clear, hydrophobic impregnation coating system suitable for application to self coloured render. Nu-Cryl A.G Rendercoat will not noticeably change the appearance of the substrate. Due to its excellent stain and water proofing qualities, dirt, pollution, and even graffiti can be removed from the treated surface. The system gives long life graffiti and environmental protection.It has outstanding resistance to weathering and ultra-violet degradation, and no reapplication is required after graffiti removal. Satisfies Class’0’ requirements of current Building Regulation.